Home Site Map What's New Company Info Contact Us
Resonator Info Form

Up ]

 

In order to evaluate your resonator requirements, you can use the following form to submit baseline information. This information will be useful for subsequent discussions. Of course, you can also contact Krell Engineering directly.

bulletThis form will only be used for discussion of your resonator. It does not imply any commitment by either you or Krell Engineering.
bulletPlease be as complete as possible. If an item does not apply or if the information is confidential, then just leave that item blank.
bulletRequired items are shown in green.
bulletAll information will be kept confidential. 

Resonator Information Form

Application description
Specifications
Resonator type
Frequency (kHz)
Material
Dimensions (approximate)
Output amplitude
(specify microns or mils, peak-to-peak)
Output amplitude uniformity
(for large horns, %)
Gain
(output amplitude / input amplitude)
Power throughput (for transducers/converters, watts)
Operating temperature range
(specify °C or °F)
Problems with current design
Additional information
Desired completion date
Name
Position
Company
Address
Telephone
Fax
E-mail
Web site
Contact you by: Telephone  (best time/day )
E-mail

After you click "Submit Request" below, this form will be e-mailed to Krell Engineering.  This may take several seconds.  Then a confirmation form will be displayed; scroll to the bottom of the confirmation form and click "Back to the form" or use your browser's Back button to return to this form.

 

Top | Home | Site Map | What's New | Company Information | Contact Us

Krell Engineering
212 E. Medwick Garth  •  Baltimore, MD  21228  •  USA
410-747-5731

e-mail: info@krell-engineering.com